Schmersal ZS 335-11Z-M20

Schmersal N20-11RZ-M16-S

Schmersal T2A-471-02/02-2512-4
Schmersal BP20N
Schmersal BP20S
Schmersal T2A-471-02/02Y-RMS

Thông số kỹ thuật công tắc hành trình ZS 335-11Z-M20:

• Metal enclosure
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 40,5 mm x 76 mm x 38 mm
• Snap action with constant contact pressure up to switching point
• Actuator heads can be repositioned by 4 x 90°
• 1 Cable entry M 20 x 1.5
• Design to EN 50041

Ordering details
Product type description	ZS 335-11Z
Article number	101166484
EAN code	4030661215358
eCl@ss	27-27-26-01
Approval
Approval	USA/CAN CCC
Classification
Standards	EN ISO 13849-1
B10d Normally-closed contact (NC)	20.000.000
Mission time	20 Years
notice
Global Properties
Product name	Z 335 Druckbolzen S
Standards	EN 60947-5-1, BG-GS-ET-15
Compliance with the Directives (Y/N)	Yes
Suitable for safety functions (Y/N)	Yes
Actuator type	B to EN 50041
Materials
– Material of the housings	Aluminium
– Material of the contacts	Silver
Housing coating	painted
Housing construction form	Norm construction design
Weight	185 g
Mechanical data
Design of electrical connection	Screw connection
Cable section
– Min. Cable section	0,75 mm²
– Max. Cable section	2.5 mm²
Mechanical life	30.000.000 operations
Switching frequency	max. 5000 /h
notice	All indications about the cable section are including the conductor ferrules.
notice	All indications about the cable section are including the conductor ferrules.
Design of actuating element	Plunger
Actuating force	min. 12 N
Bounce duration	in accordance with actuating speed
Switchover time	< 2 ms
Actuating speed for vertical actuation
– Min. Actuating speed
– Max. Actuating speed	0,5 m/s
Ambient conditions
Ambient temperature
– Min. environmental temperature	−30 °C
– Max. environmental temperature	+80 °C
Protection class	IP67
Electrical data
Design of control element	Normally open contact (NO), Opener (NC)
Switching principle	Snap switch element
– positive break NC contact
Number of auxiliary contacts	1 piece
Number of safety contacts	1 piece
Rated impulse withstand voltage Uimp	6 kV
Rated insulation voltage Ui	500 V
Thermal test current Ithe	10 A
Utilisation category	AC-15: 230 V / 4 A, DC-13: 24 V / 4 A
Required rated short-circuit current	1000 A
Max. fuse rating	6 A gG D-fuse
ATEX
Explosion protection categories for gases	None
Explosion protected category for dusts	None
Dimensions
Dimensions of the sensor
– Width of sensor	40.5 mm
– Height of sensor	103.5 mm
– Length of sensor	38 mm
Diagram
Note Diagram   positive break NC contact   active   no active   Normally-open contact   Normally-closed contact
Switch travel diagram
Notes Switch travel diagram   Contact closed   Contact open   Setting range   Break point   Positive opening sequence/- angle VS  adjustable range of NO contact VÖ  adjustable range of NC contact N   after travel
Ordering suffix
The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: ZS 335-11z-1637
…-1637	0,3 µm gold-plated contacts
…-NPT	Cable entry NPT 1/2“
…-ST	M12 connector with A-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Rated operating voltage Ue: 50 V Operating current Ie: 4 A Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.
…-2310	M12 connector with B-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Rated operating voltage Ue: 50 V Operating current Ie: 4 A Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.
Ordering code
(1)(2) 3(3)5-(4)Z(5)-(6)-(7)-(8)-(9) (1) Z Snap action T Slow action (2) S Plunger S R Roller plunger R H Roller lever H 10H Rod lever 10H 7H Roller lever 7H 1K Offset roller lever 1K 3K Angle roller lever 3K (3) 3 slim design 5 large design (4) 11 1 Normally open contact (NO) / 1 Opener (NC) 02 2 Opener (NC) 20 2 Normally open contact (NO) (Switch with 2 NO contacts are not for security tasks) 01/01 1 Opener (NC) left / 1 Opener (NC) right 12 1 Normally open contact (NO) / 2 Opener (NC) 03 3 Opener (NC) (5) H Slow action with staggered contacts UE Slow action with overlapping contacts (6) G24 with LED (7) without Cable entry M20 NPT cable entry NPT 1/2″ ST M12 connector with A-coding (Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.) ST-2310 M12 connector with B-coding (Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.) (8) 2138 Roller lever 7H for Position switches with safety function (9) 1637 gold-plated contacts