Fieldbus data

• Status of the inputs and safe outputs of the MSC system
• Input and output bits sent and received by the higher-level control system
• Diagnostic data

Configuration

The software is used to configure the fieldbus module via the USB interface. The current configuration can be polled at any time, even during operation. The following parameters can be set:

• IP address and name of the fieldbus module in the fieldbus
• Fieldbus baud rate
• Up to firmware version 2.0: selection of data sent via the fieldbus

Scope of delivery

• The expansion plug (order no. 121308) is included with the expansion module

Accessories

• Plug-in screw terminals (order no. 121319) must be ordered separately