Cảm biến CMS-R-BZB-01P-AS1 (Euchner 105094)
Thông số kỹ thuật cảm biến Euchner Read heads CMS-R-BZB-01P-AS1 (Order no. 105094)
đại lý euchner | đại lý CMS-R-BZB-01P-AS1 | đại lý 105094
nhà phân phối euchner | nhà phân phối CMS-R-BZB-01P-AS1 | Safety relay 105094

| Operating distance on | min. 7 mm |
| Secured switch-off distance sar | max. 40 mm |
| Center offset | |
| symmetrical, at distance s = 3 mm |
Giá trị kết nối điện
| ASI operating current | max. 30 mA |
| ASI data in | |
| according to AS-i Safety at Work | D0, D1, D2, D3 (Switch actuated = code sequence / switch not actuated = zero sequence) |
| ASI-LED | |
| LED red/green alternately flashing | Fault |
| LED red flashing | Fault |
| LED red/yellow alternately flashing | No data exchange between mer and slave (Slave address=0) |
| LED green | Normal operation |
| LED red | No data exchange between mer and slave (Mer in the STOP mode / Slave not in LPS / Slave with incorrect IO;ID / Reset active on the slave) |
| ASI slave type | |
| according to ASI specification 3.0 | EA code: 0 |
| according to ASI specification 3.0 | ID code: B |
| ASI voltage | |
| DC | 26.5 … 30 … 31.6 V |
| Kết nối type | hard-wired encapsulated cable with plug connector M12 |
| Design | B |
| Định hướng cài đặt | any (During mounting it must be ensured that the marking arrows on the actuator and the read head are opposite each other.) |
| Chiều dài cáp | 1 m |
| Tuổi thọ cơ học | 100 x 10⁶ |
| Thời gian đáp ứng | |
| after change in the actuation status | max. 5 ms |
| Cấp bảo vệ | IP67 |
| Nhiệt độ môi trường | -20 … +60 °C |
| Material | |
| Thân | Reinforced thermoplic (PPS), fully encapsulated |
| Cable material | PUR |
| Method of operation | magnetic, reed contact |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Thời gian trễ | 20 y |
| Monitoring of the guard position | |
| B10D | 3 x 10⁶ |
| Category | 3 |
| Mức hiệu suất | PL e |
| PFHD | 4.29 x 10-8 |


