Cảm biến CMS-R-BZB-03V (Euchner 097368)

Thông số kỹ thuật cảm biến Euchner Read heads CMS-R-BZB-03V (Order no. 097368)

đại lý euchner | đại lý CMS-R-BZB-03V | đại lý 097368

nhà phân phối euchner | nhà phân phối CMS-R-BZB-03V | Safety relay 097368

Giá trị kết nối điện

Cầu chì
Power supply / safety contacts, external contact protection	Cầu chì 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
dòng điện ngắn mạch định mức	100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Electrical switching frequency
At nominal current 8 A	max. 0.1 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
at I_min = 10 mA	max. 5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Chuyển đổi điện áp
DC	24 … 35 V (DC)
Chuyển đổi điện áp according to UL
according to UL Class 2	max. 24 V AC/DC
Chuyển đổi dòng điện	max. 100 mA
Switching characteristics	parallel
Switching delay from state change	max. 26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)

Kết nối type	Hard-wired encapsulated cable with cable end sleeves 0.34 mm²
Number of NO contacts	2 NO contacts with internal fuse, 100 mA each
Mô men xoắn	0.4 … 0.5 Nm
Design	B
Định hướng cài đặt	any (During mounting it must be ensured that the marking arrows on the actuator and the read head are opposite each other.)
Chiều dài cáp	3 m
Tuổi thọ cơ học	100 x 10⁶
Cấp bảo vệ	IP67
Nhiệt độ môi trường	-20 … +60 °C
Material
Cable material	PVC
Thân	Fiber glass reinforced PPS
Method of operation	magnetic, reed contact

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Monitoring of the guard position
B_10D	20 x 10⁶

in compliance with	EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
Classification according to EN IEC 60947-5-3	M3D36AS1

In combination with read head ESM-BA201, ESM-BA202, ESM-BA203, ESM-BA301, ESM-BA302, ESM-BA303, ESM-BA201P, ESM-BA301P and actuator CMS-M-BH

Secured switch-off distance s_ar	max. 20 mm (The assured release distance s_ar corresponds to the reset distance.)
Secured switching distance s_ao
with center offset m=0	min. 7 mm (Value applies only if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
Center offset
at s=3 mm read distance	2.5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)